PowerSmith PAVC101 10 Amp Ash Vacuum

You looking to find the "PowerSmith PAVC101 10 Amp Ash Vacuum" Good news! You can purchase PowerSmith PAVC101 10 Amp Ash Vacuum with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $89.99    

Product Feature

• Specifically designed to clean warm and cool ash out of fireplaces, wood stoves, pellet stoves, and barbeque grills
• Washable and replaceable fire-resistant filter system filters out the finest dust and ash
• Heat-resistant metal hose and metal canister. Quiet and Powerful 10 Amp motor
• Additional Accessories, Casters and a 16 foot cord allows use as a regular shop vacuum
• Includes: Metal hose, metal nozzle, wheeled base, (2) straight extensionwands, brush nozzle, Turbo nozzle, and (1) Filter

Product Description

The PowerSmith PAVC101 Ash Vacuum is specifically designed to clean warm and cool ash out of fireplaces, wood stoves, pellet stoves, and barbeque grills. The washable, replaceable and fire-resistant 2-layer filter system, together with the Heat-resistant metal hose and metal canister, stands high temperature and prevents fire hazards. A layer of micro filter catches the finest ash and dust. The cCanister holds up to 3 Gallons of ashes. It has a powerful but quiet 10 Amp motor with a noise level less than 79 db. Additional Accessories, Casters and a 16 foot cord allows use as a regular shop vacuum. It also can be used as a blower.

PowerSmith PAVC101 10 Amp Ash Vacuum Review

I use a charcoal grill/smoker at least 3 times a week and have done so for years. Part of the routine maintenance is getting the spent ash out of the grill. Until recently, I used a wet/dry vac, but this had a couple of drawbacks. First, the charcoal dust would blow out of the vacuum's exhaust port and get all over. All over me. All over the patio...everywhere. Second, unless the ash was cold there was a chance of ruining the vacuum. Third, the noise. Although since I'm running it outside for brief periods it was never a big deal. A few years back I ran across an ad for a fireplace vac and thought "THIS IS IT!" It had a metal canister and a metal wand and tube. Then I saw the price. Over $400. "Oh well" I thought. "I'll just stick with what I have." After my old standby quit I was in the market for a new one and ran across this "Ash Vacuum." The first thing I looked for was the price. "Not bad" I thought. I looked at the features and it had the metal canister, wand and tube like the other one I had seen years before. It even boasted a fine ash filter and quiet operation. I dug around for some reviews and didn't find much, but I decided to go for it. Upon start-up I did notice that is was quieter than I expected, but I wasn't all that interested in the noise. I wanted to see how it was going to handle the ash. I proceeded to vacuum the old ash, and to my amazement, no ash flew out of the exhaust! I have used this about 20 times and so far so good. I have used it during a slow smoking on ash that wasn't red hot. The canister got warm but nothing melted. Be warned if you attempt to suck up red hot coals, I suspect you will ruin the vacuum. The vacuum comes with some accessories to do other types of vacuuming. A couple of extension tubes and a wide flat head that you could used on a hard smooth surface (a garage floor I presume) but I haven't used it for that yet, but I will. Since the unit doesn't throw out debris from the exhaust and runs fairly quiet I could use it indoors too. Finally!

Most of the consumer Reviews tell that the "PowerSmith PAVC101 10 Amp Ash Vacuum" are high quality item. You can read each testimony from consumers to find out cons and pros from PowerSmith PAVC101 10 Amp Ash Vacuum ...